mouseover to enlarge
Standard Low Profile Cam Base — Swivel Standard Low Profile Cam Base — Swivel
click thumbnail to select

Standard Low Profile Cam Base — Swivel

Part No. 205
$149.40  In Stock
Minimum line Ø (mm)3 mm
Minimum line Ø (in)1/8 in
Maximum line Ø (mm)12 mm
Maximum line Ø (in)1/2 in
Use with57 mm/Big Bullet/Dinghy/2.25"/small ratchets

Ball bearing swivel bases feature dual rows of Delrin® ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks. The low profile 205 is used when installation is at deck level and when smaller blocks are used.

Delrin® is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates.

Height (in)4 1/2 in
Height (mm)114 mm
Weight (g)340 g
Weight (oz)12 oz
Minimum line Ø (mm)3 mm
Minimum line Ø (in)1/8 in
Maximum line Ø (mm)12 mm
Maximum line Ø (in)1/2 in
Fastener spacing (mm)19 mm
Fastener spacing (in) 3/4 in
Fasteners (mm)5 FH mm
Fasteners (in)#10 FH in
Use with57 mm/Big Bullet/Dinghy/2.25"/small ratchets 
Drawing - DWG:  205.dwg (open/save)
Drawing - DXF:  205.dxf (open/save)
3D drawing - IGS:  205.igs (open/save)
Photo - EPS:  205.eps (open/save)
Photo - JPG:  205.jpg (open/save)

DO NOT use Harken equipment for human suspension unless product is specifically certified and labeled for such use.

  • United States
  • Australia
  • France
  • Italia
  • New Zealand
  • Polska
  • Sverige
  • UK