mouseover to enlarge
60 mm Protexit™ Exit Block 60 mm Protexit™ Exit Block
click thumbnail to select

60 mm Protexit™ Exit Block

Part No. 1204
$137.80  In Stock
Sheave Ø (mm)60 mm
Sheave Ø (in)2 3/8 in
Maximum line Ø (mm)12 mm
Maximum line Ø (in)1/2 in
Maximum working load (kg)1200 kg
Maximum working load (lb)2640 lb

When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too.

Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates.

Sheave Ø (mm)60 mm
Sheave Ø (in)2 3/8 in
Length (mm)129 mm
Length (in)5 1/16 in
Weight (g)179 g
Weight (oz)6.3 oz
Maximum line Ø (mm)12 mm
Maximum line Ø (in)1/2 in
Fasteners (mm)6 FH mm
Fasteners (in)1/4 FH in
Fastener spacing (mm)105 mm
A (mm)24.3 mm
B (mm)84 mm
Maximum working load (kg)1200 kg
Maximum working load (lb)2640 lb
Breaking load (kg)2400 kg
Breaking load (lb)5292 lb
Drawing - DWG:  1204.dwg (open/save)
3D drawing - IGS:  1204.igs (open/save)
Photo - EPS:  1204.eps (open/save)
Photo - JPG:  1204.jpg (open/save)
  • United States
  • Australia
  • France
  • Italia
  • New Zealand
  • Polska
  • Sverige
  • UK