mouseover to enlarge

6T Captive Reel Winch — 1201 mm Length, 20 mm Line Ø, Right Hand with Load Pin

Part No. 6T121020RHLP
  Not available on-line. Please contact your Harken dealer.
Maximum dynamic pull (kg)6000 kg
Maximum dynamic pull (lb)13200 lb
Maximum line Ø (mm)22 mm
Maximum line Ø (in)7/8 in

Harken captive reel winches represent a leap forward in captive winch design. The result of years of intense development at Harken Italy’s dedicated facility, captive winches are offered with pulling loads of 1.5 to 25 tons, with larger models currently under development. Winches are driven by a sealed inner motor gearbox, and are modular in construction for easy maintenance and service. Drum lengths vary to fit individual project requirements.

FootnoteLoads and converted sizes are guides only. Winches are customized to application. Line speeds can vary with each winch and power configuration. 
Maximum dynamic pull (kg)6000 kg
Maximum dynamic pull (lb)13200 lb
Maximum holding load (kg)9000 kg
Maximum holding load (lb)19800 lb
Minimum line Ø (mm)14 mm
Minimum line Ø (in)9/16 in
Maximum line Ø (mm)22 mm
Maximum line Ø (in)7/8 in
Maximum pressure (bar)240 bar
Maximum pressure (psi)3478 psi
Flow rate (L/min)70 L/min
Flow rate (gal/min)18 gal/min
Maximum line speed (m/min)105 m/min
Maximum line speed (ft/min)344.5 ft/min
20 mm line Ø storage (m)14.9 m
20 mm line Ø storage (ft)49.3 ft
Photo - EPS:  6T_captive-reel-winch.eps (open/save)
Photo - JPG:  6T_captive-reel-winch.jpg (open/save)

DO NOT use Harken equipment for human suspension unless product is specifically certified and labeled for such use.

  • United States
  • Australia
  • France
  • Italia
  • New Zealand
  • Polska
  • Sverige
  • UK