mouseover to enlarge

3T Captive Reel Winch — 420 mm Length, 12 mm Line Ø, Right Hand

Part No. 3T42012RH
  Not available on-line. Please contact your Harken dealer.
Maximum dynamic pull (kg)3000 kg
Maximum dynamic pull (lb)6600 lb
Maximum line Ø (mm)18 mm
Maximum line Ø (in)3/4 in

Harken captive reel winches represent a leap forward in captive winch design. The result of years of intense development at Harken Italy’s dedicated facility, captive winches are offered with pulling loads of 1.5 to 25 tons, with larger models currently under development. Winches are driven by a sealed inner motor gearbox, and are modular in construction for easy maintenance and service. Drum lengths vary to fit individual project requirements.

FootnoteLoads and converted sizes are guides only. Winches are customized to application. Line speeds can vary with each winch and power configuration. 
Maximum dynamic pull (kg)3000 kg
Maximum dynamic pull (lb)6600 lb
Maximum holding load (kg)5000 kg
Maximum holding load (lb)11000 lb
Minimum line Ø (mm)12 mm
Minimum line Ø (in)1/2 in
Maximum line Ø (mm)18 mm
Maximum line Ø (in)3/4 in
Maximum pressure (bar)190 bar
Maximum pressure (psi)2753 psi
Flow rate (L/min)50 L/min
Flow rate (gal/min)13 gal/min
Maximum line speed (m/min)30 m/min
Maximum line speed (ft/min)99.3 ft/min
12 mm line Ø storage (m)14.9 m
12 mm line Ø storage (ft)49.3 ft
Photo - EPS:  3T_captive-reel-winch.eps (open/save)
Photo - JPG:  3T_captive-reel-winch.jpg (open/save)

DO NOT use Harken equipment for human suspension unless product is specifically certified and labeled for such use.

  • United States
  • Australia
  • France
  • Italia
  • New Zealand
  • Polska
  • Sverige
  • UK