0item in your cart

30mm Protexit™ Exit Block

30mm Protexit™ Exit Block

Part No. 1200

Maximum working load (kg) 250 kg

Maximum working load (lb) 550 lb

Sheave Ø (mm) 30 mm

Sheave Ø (in) 1 3/16 in

Maximum line Ø (mm) 8 mm

Maximum line Ø (in) 5/16 in

When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too. Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates.
Length (mm)75 mm
Length (in)2 15/16 in
Weight (g)37 g
Weight (oz)1.3 oz
Maximum working load (kg)250 kg
Maximum working load (lb)550 lb
Breaking load (kg)500 kg
Breaking load (lb)1103 lb
Sheave Ø (mm)30 mm
Sheave Ø (in)1 3/16 in
Maximum line Ø (mm)8 mm
Maximum line Ø (in)5/16 in
Fasteners (mm)5 FH mm
Fasteners (in)#10 FH in
A (mm)18.2 mm
B (mm)45.7 mm
Fastener spacing (mm)57 mm