0item in your cart

Standard Furling System — 3mm Luff Wire

Part No. 435

Maximum working load (kg) 431 kg

Maximum working load (lb) 950 lb

Drum Ø (mm) 73 mm

Drum Ø (in) 2 7/8 in

Maximum luff wire Ø (mm) 3 mm

Maximum luff wire Ø (in) 1/8 in

Harken® Small Boat furling systems allow the trailerable cruising or dinghy sailor to set and furl the jib from the cockpit. An optional hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without removing the headstay. Swivels are independent of the headstay, allowing you to tension the luff separately from the mast rake.
Weight (g)215 g
Weight (oz)7.6 oz
Maximum line Ø (mm)4 mm
Maximum line Ø (in)5/32 in
Maximum working load (kg)431 kg
Maximum working load (lb)950 lb
FootnoteIncludes drum and upper swivel. Does not include hoistable swivel.
Drum Ø (mm)73 mm
Drum Ø (in)2 7/8 in
Clevis pin Ø (mm)6.4 mm
Clevis pin Ø (in)1/4 in
Pin-to-pin length (mm)64 mm
Pin-to-pin length (in)2 1/2 in
Jaw width (mm)8 mm
Jaw width (in) 5/16 in
Maximum luff wire Ø (mm)3 mm
Maximum luff wire Ø (in) 1/8 in
Boat length - monohull (m)4.9 - 6.1 m
Boat length - monohull (ft)16 - 20 ft
Boat length - multihull (m)to 5.5 m
Boat length - multihull (ft)to 18 ft
Includes upper swivel164
Includes drum165
Note

Includes drum and upper swivel. Does not include hoistable swivel.

F R E E   G R O U N D  S H I P P I N G

for orders over $100!

Valid on orders shipping within the United States

Chiudi