0item in your cart

High-Load Furling System — 5mm Luff Wire

Part No. 436

Maximum working load (kg) 907 kg

Maximum working load (lb) 2000 lb

Drum Ø (mm) 106 mm

Drum Ø (in) 4 3/16 in

Maximum luff wire Ø (mm) 5 mm

Maximum luff wire Ø (in) 3/16 in

Harken® Small Boat furling systems allow the trailerable cruising or dinghy sailor to set and furl the jib from the cockpit. An optional hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without removing the headstay. Swivels are independent of the headstay, allowing you to tension the luff separately from the mast rake.
Weight (g)646 g
Weight (oz)22.8 oz
Maximum line Ø (mm)6 mm
Maximum line Ø (in)1/4 in
Maximum working load (kg)907 kg
Maximum working load (lb)2000 lb
FootnoteIncludes drum and upper swivel. Does not include hoistable swivel.
Drum Ø (mm)106 mm
Drum Ø (in)4 3/16 in
Clevis pin Ø (mm)7.9 mm
Clevis pin Ø (in)5/16 in
Pin-to-pin length (mm)102 mm
Pin-to-pin length (in)4 in
Jaw width (mm)10 mm
Jaw width (in) 3/8 in
Maximum luff wire Ø (mm)5 mm
Maximum luff wire Ø (in) 3/16 in
Boat length - monohull (m)6.1 - 7.6 m
Boat length - monohull (ft)20 - 25 ft
Boat length - multihull (m)5.5 - 7 m
Boat length - multihull (ft)18 - 23 ft
Includes upper swivel207
Includes drum208
Note

Includes drum and upper swivel. Does not include hoistable swivel.

F R E E   G R O U N D  S H I P P I N G

for orders over $100!

Valid on orders shipping within the United States

Chiudi