Part No. 50.2STEC
Power ratio - 1 10.90
Power ratio - 2 50.40
|Drum Ø (mm)||110 mm|
|Drum Ø (in)||4 5/16 in|
|Base Ø (mm)||194 mm|
|Base Ø (in)||7 5/8 in|
|Line entry height (mm)||97 mm|
|Line entry height (in)||3 7/8 in|
|Fastener circle (mm)||150 mm|
|Fastener circle (in)||5 7/8 in|
|Fasteners (mm)||M8 SH mm|
|Fasteners (in)||5/16 SH in|
|Number of fasteners||5|
|Gear ratio - 1||2.40|
|Gear ratio - 2||10.90|
|Power ratio - 1||10.90|
|Power ratio - 2||50.40|
Jaw Assembly - 50 Radial Winch
Upper jaw adjusts under line pressure; accepts a variety of line sizes. Teeth grip evenly with or without load.
Housing Assembly - 50 Radial/Performa Winch
Skirt Assembly - 50 Radial Winch
Lightweight composite skirt works with patented mounting system for fast, one-person installation without removing drum. Snap off the skirt at the base of the winch. Slide bolts through the slots in the winch base and snap the plastic skirt back on. Place the stud bolts into the predrilled holes on the deck and tighten from belowdeck.
Gear Assembly - 50 Radial/Performa Z11
Drum - 50 Radial Chrome Winch
Nonabrasive diagonal ribs on gripping surface hold line securely and reduce line wear; ribs shaped for each winch size and drum material.
Stripper Arm - 50 Radial Winch
Stripper arm completely covers rotating winch top, preventing fingers and clothing from catching in moving parts. Adjusts to multiple positions after the winch is mounted to optimize line exit. Shaped to smoothly feed line in and out of self-tailing jaws.
Stripper Arm Cover - 50.2 Radial/Performa Winch