Part No. 35.2STEA
Speed 2
Power ratio - 1 13.50
Power ratio - 2 35.90
F (mm) 155 mm
Material | Aluminum |
Speed | 2 |
Drum Ø (mm) | 80 mm |
Drum Ø (in) | 3 1/8 in |
Base Ø (mm) | 149 mm |
Base Ø (in) | 5 7/8 in |
Line entry height (mm) | 79 mm |
Line entry height (in) | 3 1/8 in |
Fastener circle (mm) | 123 mm |
Fastener circle (in) | 4 7/8 in |
Fasteners (mm) | 6 SH mm |
Fasteners (in) | 1/4 SH in |
Number of fasteners | 5 |
Gear ratio - 1 | 2.13 |
Gear ratio - 2 | 5.65 |
Power ratio - 1 | 13.50 |
Power ratio - 2 | 35.90 |
E (mm) | 43 mm |
E (in) | 1 3/4 in |
F (mm) | 155 mm |
F (in) | 6 1/8 in |
G (mm) | 227 mm |
G (in) | 8 7/8 in |
ID BOM | Qty | Price | |||
A94130500 | - | more info | |||
Gear Assembly - 35/40 Radial/Performa Z20 |
|||||
A94131100 | 1 | more info | $182.05 |
Add to cart
|
|
Housing Assembly - 35 Radial Winch |
|||||
A94131400 | 1 | more info | $24.95 |
Add to cart
|
|
Skirt Assembly - 35 Radial Winch Lightweight composite skirt works with patented mounting system for fast, one-person installation without removing drum. Snap off the skirt at the base of the winch. Slide bolts through the slots in the winch base and snap the plastic skirt back on. Place the stud bolts into the predrilled holes on the deck and tighten from belowdeck. |
|||||
A94131800 | 1 | more info | $41.60 |
Add to cart
|
|
Jaw Assembly - 35/40 Radial Winch Upper jaw adjusts under line pressure; accepts a variety of line sizes. Teeth grip evenly with or without load. |
|||||
S4129500A5 | 1 | more info | $5.05 |
Add to cart
|
|
Stripper Arm Cover - 35 Radial/Performa Winch |
|||||
S413160053 | 1 | more info | $277.75 |
Add to cart
|
|
Drum - 35 Aluminum Radial Winch Nonabrasive diagonal ribs on gripping surface hold line securely and reduce line wear; ribs shaped for each winch size and drum material. |
|||||
S414200019 | 1 | more info | $56.15 |
Add to cart
|
|
Stripper Arm - 35/40 Radial Winch Stripper arm completely covers rotating winch top, preventing fingers and clothing from catching in moving parts. Adjusts to multiple positions after the winch is mounted to optimize line exit. Shaped to smoothly feed line in and out of self-tailing jaws. |