Part No. 40.2STECW
Maximum line Ø (mm) 12 mm
Maximum line Ø (in) 1/2 in
Power ratio - 1 13.50
Power ratio - 2 39.90
|Base Ø (mm)||157 mm|
|Base Ø (in)||6 3/16 in|
|Maximum line Ø (mm)||12 mm|
|Maximum line Ø (in)||1/2 in|
|Fastener circle (mm)||123 mm|
|Fastener circle (in)||4 7/8 in|
|Fasteners (mm)||M6 SH mm|
|Fasteners (in)||1/4 SH in|
|Number of fasteners||5|
|Gear ratio - 1||2.13|
|Gear ratio - 2||6.28|
|Power ratio - 1||13.50|
|Power ratio - 2||39.90|
Gear Assembly - 35/40 Radial/Performa Z20
Housing Assembly - 40 Radial Winch
Drum - 40 Radial Chromed Bronze Winch
Nonabrasive diagonal ribs on gripping surface hold line securely and reduce line wear; ribs shaped for each winch size and drum material.
Stripper Arm - 35/40 Radial Winch
Stripper arm completely covers rotating winch top, preventing fingers and clothing from catching in moving parts. Adjusts to multiple positions after the winch is mounted to optimize line exit. Shaped to smoothly feed line in and out of self-tailing jaws.
Jaw Assembly - 35/40 Radial White Winch
Upper jaw adjusts under line pressure; accepts a variety of line sizes. Teeth grip evenly with or without load.
Skirt Assembly - 40 Radial White Winch
Lightweight composite skirt works with patented mounting system for fast, one-person installation without removing drum. Snap off the skirt at the base of the winch. Slide bolts through the slots in the winch base and snap the plastic skirt back on. Place the stud bolts into the predrilled holes on the deck and tighten from belowdeck.
Stripper Arm Cover - 40 Radial White Winch