Part No. 20STP
Maximum line Ø (mm) 12 mm
Maximum line Ø (in) 1/2 in
Power ratio - 1 19.20
|Drum Ø (mm)||73 mm|
|Drum Ø (in)||2 7/8 in|
|Base Ø (mm)||137 mm|
|Base Ø (in)||5 3/8 in|
|Height (mm)||148 mm|
|Height (in)||5 13/16 in|
|Weight (kg)||2.4 kg|
|Weight (lb)||5.3 lb|
|Line entry height (mm)||61 mm|
|Line entry height (in)||2 3/8 in|
|Minimum line Ø (mm)||6 mm|
|Minimum line Ø (in)||1/4 in|
|Maximum line Ø (mm)||12 mm|
|Maximum line Ø (in)||1/2 in|
|Fastener circle (mm)||110 mm|
|Fastener circle (in)||4 3/8 in|
|Fasteners (mm)||M6 SH mm|
|Fasteners (in)||1/4 SH in|
|Number of fasteners||5|
|Gear ratio - 1||2.76|
|Power ratio - 1||19.20|
Socket Assembly - 15-80 Radial/Performa Winch
Accepts all Harken winch handles.
Gear Assembly - 20 Radial Z18
Skirt Assembly - 20 Radial/Performa Winch
Lightweight composite skirt works with patented mounting system for fast, one-person installation without removing drum. Snap off the skirt at the base of the winch. Slide bolts through the slots in the winch base and snap the plastic skirt back on. Place the stud bolts into the predrilled holes on the deck and tighten from belowdeck.
Jaw Assembly - 15/20 Radial/Performa Winch
Upper jaw adjusts under line pressure; accepts a variety of line sizes. Teeth grip evenly with or without load.
Stripper Arm Cover - 20 Radial/Performa Winch
Shaft - 20 Radial/Performa Winch
Black Stripper Arm - 20 Performa Winch
Stripper arm completely covers rotating winch top, preventing fingers and clothing from catching in moving parts. Adjusts to multiple positions after the winch is mounted to optimize line exit. Shaped to smoothly feed line in and out of self-tailing jaws.
Housing Assembly - 20 Radial/Performa Winch
Drum - 20 Performa Winch
Sandblasted drums and ribs optimized for halyard and sheeting applications using small-diameter, high-strength line.