product
mouseover to enlarge

Trigger Cleat Low Profile Cam Base — Swivel

Part No. 361
$275.25  Limited Quantities In Stock
Minimum line Ø (mm)3 mm
Minimum line Ø (in)1/8 in
Maximum line Ø (mm)12 mm
Maximum line Ø (in) 1/2 in
Use with Big Bullet / Dinghy / 2.25" / little ratchets

Ball bearing swivel bases feature dual rows of Delrin® ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks.

Delrin® is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates.

Height (mm)110 mm
Height (in)4 5/16 in
Weight (g)398 g
Weight (oz)14 oz
Minimum line Ø (mm)3 mm
Minimum line Ø (in)1/8 in
Maximum line Ø (mm)12 mm
Maximum line Ø (in) 1/2 in
Fastener spacing (mm)19 mm
Fastener spacing (in) 3/4 in
Fasteners (mm)5 FH mm
Fasteners (in)#10 FH in
Use with Big Bullet / Dinghy / 2.25" / little ratchets 
Manual: 4401.pdf (open/save)
DWG: 361.dwg (open/save)
DXF: 361.dxf (open/save)
EPS: 361.eps (open/save)
High-res JPG: 361.jpg (open/save)

DO NOT use Harken Equipment for Human suspension.

  • United States
  • Australia
  • France
  • Italia
  • New Zealand
  • Polska
  • Sverige
  • UK