mouseover to enlarge

22 mm A Non-CB Battcars

22 mm High-Load Headboard Car Assembly — Non-CB

Part No. 1807HL
$661.55$144.71 This limited quantity item sold out
Maximum sail area - monohull (m²)51 m²
Maximum sail area - monohull (ft²)550 ft²
Maximum sail area - multihull (m²)44 m²
Maximum sail area - multihull (ft²)475 ft²
Maximum working load (kg)590 kg
Maximum working load (lb)1300 lb

A Harken® Battcar system along with full-length battens helps raise, douse, and reef with ease and acts as extra crew if you’re sailing shorthanded. Battcar systems outperform in-mast or in-boom furling, cost less, and you don’t need to recut your sail. The free-rolling ball bearing cars let you hoist and reef the main quickly on all points of sail.

Aluminum endcaps; Torlon® ball bearings.

Torlon is a registered trademark of Solvay Advanced Polymers L.L.C.

Width (mm)56 mm
Width (in)2 3/16 in
Weight (g)563 g
Weight (oz)20 oz
Maximum headboard thickness (mm)12 mm
Maximum headboard thickness (in)1/2 in
Maximum sail area - monohull (m²)51 m²
Maximum sail area - monohull (ft²)550 ft²
Maximum sail area - multihull (m²)44 m²
Maximum sail area - multihull (ft²)475 ft²
Maximum working load (kg)590 kg
Maximum working load (lb)1300 lb
Manual: 4355.pdf (open/save)
DWG: 1807HL.dwg (open/save)
DXF: 1807hl.dxf (open/save)

DO NOT use Harken equipment for human suspension unless product is specifically certified and labeled for such use.

  • United States
  • Australia
  • France
  • Italia
  • New Zealand
  • Polska
  • Sverige
  • UK